Volkszaehler Gehäuse Case
Description
update 2021/01/11: i received the missing parts and put it all together. should work. This is a casing for the reading head of the volkszaehler-project. - created with FreeCAD 0.19pre - Instead of using the rather expensive and not that common 27mm neodym ring-magnet i put 4 smaller dents in the bottom-plate that will fit a 6mm x1mm round magnet The spacer puts the pcb at the right height while having the magnets close to the contact-plate on the meter - the cap holds with a 45°-turn on the casing - the opening for the cable should fit a 2pair-cable and its indentations should provide some kind of strain relief - The casing has a small small nipple at the border of the contact-plate. The idea is, that you may rasp a small notch in the border of the contactplate to fit this nipple, so that the sensor-head can not be turned around to easily. If you do not need this, you may rasp off this nipple Consider this design alpha-stadium as i have not put it together because i did not receive the missing components yet. As soon as i have all parts i will put together and eventually modify these files.
Statistics
Likes
4
Downloads
0