GEM Single Edge Safety Razor "Weck SE" vintage Weck style
Description
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. This SE safety razor is a Vintage Weck inspired design. This razor uses the more readily available GEM blades. Appropriately named "Weck SE", this razor is very easy to maneuver, and the unique floating edge design provides excellent feedback. Once assembled, it is a one-piece razor with no moving parts just like the Vintage Weck from the early 1900s. How to install blade: Hold the blade from sides with thumb and index finger and edge pointing away from hand. With the same grip, insert the spine of the blade through the front of the razor-head between the cap and the comb and slide into the back slot. Inspect that the blade is properly centered and that the spine is making full contact in the back slot. The cap should have good tension on the blade, and the cap's index tab should be properly seated in the blade's center slot. DO NOT INSTALL, OR REMOVE BLADE FROM THE SIDES. This is a very easy print, and the only post-processing should be the removal of the included support on the razor-head and gluing the head and handle together. Additional supports are NOT needed. Please post your makes. Enjoy
Statistics
Likes
9
Downloads
0