Spool Filament Holder (Super Simple, KISS)
Description
Yet Another Filament Spool Holder. I couldn't find exactly what I was looking for so I just drew my own and printed it. They work well so I decided to share. The idea is that you have five different sizes to choose from, 75mm to 95mm. The upright is the same for all sizes, only print the Bar and Connector in the size you want. You can print the uprights with or without logo and the connectors with or without the measurement.. The spool holder can stand alone or you can use the JoinBolt + AllThread to bolt them together which provides a fixed row of spool holders. Material, I printed those in the photo's with PLA (White/Green), PETG (White/Blue) and ABS (Orange) - pretty much any rigid filament will work just fine. The Bolts: Print with a high Infill, up to 100% (I used 75% for those on the photo's). DO NOT OVER TIGHTEN, finger tight is enough, you will see that as soon as the bolts pull tight the holder becomes rigid. Threads are standard ISO Metric M8 although I did increase tolerance on the bolts for easy assembly. Happy printing :-)
Statistics
Likes
9
Downloads
0