nVidia K20x Cooler Blower Mount
Description
A fan mount for an nVidia K20x workstation GPU - screws directly to the original K20x mounting holes, just mount a fan on the part and it'll direct airflow through the heatfins on the card. You may want to do a bit more airflow optimisation, as the current design is a bit crude and contains right angles on the intake area, resulting in turbulent air. This part was designed as a stop gap for a more permanent solution, so I'd suggest remixing this part to make it better if it works for you. Please upload your remix if it helps :) I hope this part helps one of you suffering from a hot K20x GPU! I recommend printing in PETG or if you feel up to it, ABS. I do not recommend PLA as overtime the part will absorbe heat from the card and warp. If you want to print PLA, I would recommend priting either 20% infill to add more insualtion to the part, or go the other way and go up to 80% to add more material strength.
Statistics
Likes
1
Downloads
0