H200i inspired Raspberry Pi Zero W case
Description
A case I designed based on my own H200i PC that's designed to fit a Raspberry Pi Zero W. The Raspberry Pi snaps into the case below where the motherboard is mounted and the rest is held in place unfortunately using super glue. There is a modified case file included that will allow for a heatsink to be placed over the CPU, as well as a file for someone who doesn't want to put a Raspberry Pi in. I printed it using .16 layer height, 20% infill and a brim to help with adhesion for the smaller objects and corners. The 'ALL' files for all 3 colors is all that you need, but you can also print the individual ones. If printing individual, the only ones that you need multiple of are: 2x Black_Fitting_90 5x Black_Fitting_Straight 4x Silver_Fitting_Reservoir 2x Silver_Fitting GPU I'm new to 3D modeling and printing, feel free to remix this to add stuff that I may have forgotten/done wrong.
Statistics
Likes
6
Downloads
0