FDL3 - HPA
Description
This is the HPA FDL3 remix called WTFDL-3 Please note this is an advanced build. You will need to have experience in HPA and ideally familiarity with the FDL3 build process. Please find some technical details here: https://www.reddit.com/r/HPAnerf/comments/ivu1gd/details_on_hpa_fdl3_software_controls/ You will need the same M3 x 43mm bolts to hold the front of the blaster together. Also, you will need a selection of M4 nuts and bolts where nuts are installed, and #6 self tapping screws for the rest of the blaster - in largely the same lengths as the OG FDL3. Regulator is a Polarstar MR. Regulator fits in the OG battery area, and the battery now fits up the top-front cowling. Step files are included just in case you don't want a MCU / Narfduino controlled blaster, or wanna adapt it to a different reg and/or solenoid.
Statistics
Likes
14
Downloads
0