DZP Mk1/Mk1.1 Springrest
Description
This is a replacement springrest for the DZP Mk1/1.1. It uses this McMaster standoff: Female Threaded Hex Standoff 18-8 Stainless Steel, 3/16" Hex, 5/8" Long, 4-40 Thread 91115A518 And a round head 4-40 screw for each side. 3/8 length is probably fine. Just press the standoff into the hex hole with a vise or channel lock or even your hands, then pop the springrest in. I highly recommend you have this printed in MJF or SLS Nylon. EDIT 5/18/2021: Tweaked the spacing on the ears holding the spring in to accommodate for newer blasters.
Statistics
Likes
2
Downloads
0