Folding Laptop Feet (with magnets!)
Description
The "_magnet" version will require 2 small magnets per model. 3mm diameter X 4mm height is ideal. Use super-glue to hold them in place. Use 12% support material (grid or triangle pattern), BUT, on the "_magnet" variant you must use a support eraser in the magnet holes to prevent clogging them. (also 3X wall thickness and >18% infill) After printing, use a small knife or box-cutter blade to separate the two halves. Be careful. When ready, find an appropriate spot on your laptop and use strong double-sided tape to mount the feet. That's it!
Statistics
Likes
6
Downloads
0