Nypon indoor water fountain V2 Ikea planting pot
Description
I love to play with water. My last version of this was okay, but not as good as i want it to be. PLA breaks easier, if it is exposed to water and I want to make the fountain modular, so that i can change things if I want to. But with PLA and the old version, there was a high chance of destroying the parts. And also, I want to print fast. So here is an Update: I made the walls 1,5mm thin, so there are just four lines of walls without infill. This makes the print faster and more flexible. I made three types of pool. The biggest one needs a screew and a nut. The smallest one doesnt if you dont put stones or some sort of decor in it. You will need: Ikea Nypon planting pot 32cm version, 25mm in diameter aluminum pipe oder whatevere material you like Tubing and a water pump m3 screws and nuts to tighten the pools three m5 screws and nuts for the foundation I hope you enjoy it as much as I do! old version: https://www.thingiverse.com/thing:4651657 I dont recommend PLA. Use PETG or ABS to print this! Update 28.01.2021: The Waterwheel spills water if it runs to fast. I made a shielded version to prevent that. Update 03.02.2021: I added a standalone foot for the well. So you can add it without have to print a new pool. Update 16.02.2021: Added a special pool for ultrasonic atomizer. The main goal was to keep the humidity above 50%. I failed, because it went down to 30%. Now its slowly rising. Update 18.02.2021: Added a Dome Form the humidpool https://vm.tiktok.com/ZMeNy1o6k/
Statistics
Likes
12
Downloads
0