Artillery Sidewinder X1 - TriangleLab Matrix Mount (StealthTouch)
Description
I really like the way Oceany mounted the BLTouch on his Hemera mount. Unfortunately, the TriangleLab Matrix has some slight variation in the nozzle offset which means the mount doesn't work out of the box, requiring a spacer on the BLTouch at a minimum. This remix moves the entire extruder +2.5mm to account for the additional Z offset of the TriangleLab Matrix nozzle. Additionally there is approximately a +2.5mm offset in the X axis. The nozzle offset to the probe is now the same as for the original Hemera mount in the X and Y axes, (0, +28). You will still need to print Oceany's BasePlate. Circuit board mount has been moved as close as possible to the extruder to allow re-use of the original heater cartridge and thermistor if desired. Use M3 x 8mm screws to mount the circuit board and prevent interference with the motor. Make sure square nuts are fitted to the stepper motor before mounting it to this bracket. I have also remixed a mount for Hangtight's part cooling fan duct that allows for the Matrix's nozzle offsets. It is available here https://www.thingiverse.com/thing:4716800 UPDATE: Sample Klipper config provided. DO NOT simply download this and go. My printer setup is far from original (aside from the Matrix) AND WILL NOT WORK on a standard machine.
Statistics
Likes
21
Downloads
0