Foldable Phone/Teacher/Tutor Stand
Description
This a phone stand to help teachers/tutors record what they are writing. Especially practical for anyone who is having to teach remotely at the moment via Zoom etc. The spring loaded phone stand is very safe for any smart phone bigger than an iPhone 5s (or this phone with a cover would even be fine). I used 4x 5.5mm wide and 17.5mm compression springs I had in a spring kit. I have also uploaded a design that should work with the typical 4.8mm wide compression springs found in many pens. You will need 2 per channel (see pictures), making up a length of approx 30mm per channel. Please follow advice on pictures for print layout and assembly, as well as what parts to print for either stand type: Wooden Stand: This stand is designed for 30x30mm timber (or similar) Additional items needed: - Compression spring (as discussed above) - 1" Backflip hinge - Wood screws similar to 3.5x25mm long - ~4 shallow wood screws (e.g. 3 x 12mm) 3D Printed Stand - This stand should only require the compression spring and some M3 or similar socket head/countersunk screws. Some glue to apply where shown in pictures is also recommended. Please let me know how printing this works out :)
Statistics
Likes
12
Downloads
0