Samyang 14mm F2.8 Cokin P 95x84 Filter holder with lens cap
Description
Hey everyone ! I wanted to use my cokin/Haida P (84x95mm) filters with my 14mm F2.8. **NOTE**: It will only work with cropped sensors (APS-C and below) as with Full Frame you will encounter major vignetting. If you want to print the honeycomb version, you will need to cut a 276x36mm piece of black tape and a 276x29mm sheet of plastified paper, align the paper in the center of the tape and you can tape it inside the printed extended lens hood so it covers every hole. There is also an STL file without the honeycomb pattern if you're not bothered about weight. You will also need to put tape on the inside to make it fit snug. There is also a lens cap that fits perfectly. It is more convenient that the bulky lens cap this lens is sold with and you won't have to remove your brand new and shiny filter holder. I provided the Fusion File so you can modify it however you want ! Let me know if you have any issues ! It's my first share on thingiverse :)
Statistics
Likes
1
Downloads
0