AAA Picatinny Rail Holo/Reflex Sight
Description
Remix of https://www.thingiverse.com/thing:2587806 I couldnt make it one for some reason, so here is the link, once I figure it out, I will change it. A mod of the original file to use no fancy circuitry, just 2x AAA batteries, a switch, and an LED. You will need to add a connector for the batteries in it. Note: this isnt really a finished model, and I had to do a lot of snipping, and gluing for it to fit. The difference between RedDotTop1 and 2 is that 2 has some tabs to line up a switch, but I had to clip most of them out anyway to fit my switch in, so they are pretty pointless. I have included 2 DesignSpark Mechanical source files, but one contains an STL I was working around, so basically editing this will be hard, sorry 'bout that. For the lens, I used some clear acrylic cut from a GoPro case with a dremel, as it was the only mostly-clear plastic I had, and it seems to be working fine. The led was too bright, so I diffused it with some plastic and coloured it black with a sharpie, which dimmed it to a good level. You will need 4 screws to hold the case to the base.
Statistics
Likes
5
Downloads
0