Magnetic Lention USB Hub H15 Mount
Description
An excellent mount that magnetically attaches to the side of your steel computer case or any other steel office furniture with an extremely strong grip. Designed to allow cable orientation from the left or right side. An additional cable loom is included to cleanly route your USB cable to a nearby USB port. Designed for the Lention 3 port USB hub with model numbers: CB-TP-H15 CB-TP-C16s 8541643123 Hub dimensions are: 4 5/16" long x 1 9/16" wide x 1/2" thick. (109.6mm long x 40.1mm wide x 12.55mm thick) Required Magnets: Two Magnet Bars 2 3/8" long x 3/8" wide x 3/16" thick. (60mm long x 10mm wide x 5mm thick) Magnets can be found on Amazon by searching 60 x 10 x 5 mm. Magnet bar installation instructions: Apply silicone adhesive or similar into the magnet cavities. Insert magnets and press down. Apply more silicone adhesive to the top of the magnets. Apply Crazy glue to the top outside ridges of the magnet cavities. Add magnet covers and press down. Leave glue to properly set before using. Optional Cable Loom Requires: Six Magnet Discs 1/2" diameter x 1/8" thick (12.7mm diameter x 3.18mm thick). Magnets can be found on Amazon by searching 12 x 3mm round. Silicone adhesive or similar. Magnet disc installation instructions: Apply silicone adhesive or similar into the main body. Insert magnet and press down. Apply more adhesive to the top of the magnet. Add magnet cover and press down. Leave glue to properly set before using. Requires: Four M3 x 8mm long machine screws. Four M3 nuts. For ideas on how to use this 3D printed item, visit: [stegoboard.com](https://stegoboard.com)
Statistics
Likes
3
Downloads
0