Flow measure part
Description
flow measure part 0.4nozzel 0.8 walls 20x20x10 1st layer 0.3 flow measure part 0.4nozzel 0.8 walls 20x20x10 1st layer 0.3 plus striningtest (attention, can have effect to wall deviations) to calibrate your extruder flow - print with 2 walls (built for 2 x 0.4 wall width) calibrate wall flow and initial layer / 1st layer flow (think about leveling etc what can create deviations). Be aware, that your measuring tool should be able to measure +/- 0.02 minimium and deviations and also come with the filament diameter. Like I do: print once and calulate the flow print secount and calculate the flow again If you have printed more than 3 times with unlogic deviations, take 1st and 2nd print, find the middle of both flow vales and print again to be as near as possible on truth how I calibrate my printers https://youtu.be/K31ww0vvIGA Interesse an 3D druck Tutorials und mehr? Interested in 3D printing tutorials and more? Hauptkanal/Main channel german https://www.youtube.com/c/moveinZ3DPrinting My small english channel/Mein kleiner Englischer Kanal https://www.youtube.com/channel/UCUl2s_l01_-O-JXEP5XsU8A
Statistics
Likes
2
Downloads
0