yarn carrier post for 3d printed knitting machine
Description
This is a post I made to replace the original yarn carrier on the sock knitting machine. I sawed off the original yarn carrier. There's no going back if you do this. Keep in mind that the measurements I used for mine are custom to work with the singer standard gauge main bed knitting machine needles that I am using. Also, the pig tail coil that I'm using to guide my yarn was hand made by me and is working at the correct height for my set up. I was not going to post this file because it is a permanent modification to the original sock machine cam shell. It is working well on the two knitting machines I installed it on. By request, I'm uploading the file I used to make my modifications. https://youtu.be/qRR6NDfy6ug
Statistics
Likes
9
Downloads
0