PrimaCreator FlexPlate guide block
Description
guiding block for prima flexplate 235mm. you also need 2 ruthex m3 threaded inserts and 2 m3x8 screws you may want to use a 3.5 drill bit on the flexplate holes (they're about 3.2) just to have a little room to work with in case you drive the inserts a little off make sure that the holes are ~77.2mm apart, ~4.5mm from edge, I have 2 of those plates, same size, and the holes are not positioned the same
Statistics
Likes
0
Downloads
0