Artillery Sidewinder X1 mod - X-Freaktion - Sidewinder X1 V4 X-belt mod
Description
You can install this mod if your X-belt is touching/rubbing the back side of your extruder. Not sure if it is necessary but at least, I don't think about mine anymore. Mine is printed with PLA, but i would recommend some other material if you heat your extruder to anything above 210 since the entire extruder casing gets hot, specially when printing for a longer time. UPDATE 28 jan 2021 -------------------------- changed the design slightly on the body for it to snap and lowered the wheel about 2.5mm for it to be more aligned with the belt. If you have downloaded this mod, you'll just need to print the "X-freaktion BODY.stl" if you have problem with it raising it self after a while like mine did.
Statistics
Likes
1
Downloads
0