LED Remote Control Holder
Description
Two 3D files are included. One is for a large remote, and also a small remote. Both files are saved in the orientation that they were printed with. Both remotes have a larger slot cut in the front, that you can use your finger to slide the remote out of the holder. The larger-size remote has a notch cut on the side that you can use to "tap" the remote out of the holder. The LED Remote Holders can be attached to surfaces using either double-stick tape or with #4 flat head wood screws. The holes in the back of the LED holder are counter-sunk for the #4 screws. No supports were needed for printing.
Statistics
Likes
6
Downloads
0