ender 3 rear psu cover and vent cover
Description
Not being a huge fan of the power supply put on the side, I designed a cover that allows it to be relocated at the rear of the machine. You will need to cut the stock 220v connector in order to do so. I joined the .f3d file if you want to modify it. The cover fits perfectly, it should just clips then you can lock it with 2 to 4 m3 bolts. The cut connector should fit perfectly as well. There is place for 2 switchs, maintained by a bracket and 2 bolts. In terms of parts you will need 4 to 6 M3 10mm nuts and bolts and 2 16mm for each feet. 2 to 4 for the cover, 2 for switch bracket. I also added a small vent cover, the rear feets and a bracket for the center aluminum profile. The feets I made are not great, it may be better to design your own.
Statistics
Likes
1
Downloads
0