Ender 3 V2 Glue Stick Holder
Description
This thing should hold most normal glue sticks up to 28mm in diameter. It will attach to any Ender 3 V2 without any additional hardware. I would expect this to work for the original Ender 3 and maybe some other models as well, but I do not know for sure if it will (let me know in the comments). I designed the part from scratch but measured the dimensions for the attaching part of the thing from another tool holder for the Ender 3 V2 (original spatula/scraper tool here: https://www.thingiverse.com/thing:4689265). .stl, .step, and .obj files are available if you want to adjust the size yourself. I currently do not have an image of the printed thing (as I am away from my printer), but will eventually add one. <b>Printing Advice: </b> I printed it upright with strong supports. I had difficulties with getting the support to stick to the bed, and would recommend a brim or a raft. It may be difficult to remove the supports unless you have them only touching the buildplate or use conical supports. Alternatively, you could try printing it on its side if your printer handles circular arches and domes well. (I have not tested this).
Statistics
Likes
34
Downloads
0