FreHD and Gotek 5.25" half height mounting brackets - TRS-80 Tandy Radio Shack
Description
These are a couple of brackets I designed/modified/remixed to allow me to mount a Gotek and a FreHD inside my TRS-80 Model III computer. The result actually looks fantastic :-) Compatible with TRS-80 Model III and Model 4 machines. - "FreHD bracket FREHD v1n.stl" : mounting bracket for the FreHD - "FeHD bracket BLANK v1e.stl" : blank bracket for the 5.25" gap if required - "FreHD bracket FIXTURES v1g.stl" : helpers to attach two 5.25" brackets to each other - "Gotek 5.25 half height 1.3 oled.stl" : remixed Gotek bracket (with 1.3" OLED screen, link to original below) The "Fixtures" are required because the TRS-80 Model III/4 only has screw holes for a full height 5.25" floppy drive. The "fixtures" allow you to mount 2 of the above brackets, see the 3D renders how they can be used. I only use 7 screws to mount it in the computer (this excludes the screws to mount the gotek and freHD onto their respective brackets): - 4x M2.5 8mm screws to attach the "FIXTURES" to the brackets. - 3x M2.5 20mm screws with nut to mount the combined bracket in the computer case. (M3 screws should also work, but I've had those cracking the plastic from time to time) Note: - these are remixes of the Gotek bracket at: https://www.thingiverse.com/thing:3468429 - the FreHD bracket has been designed based on, but is not a remix of, following design: https://www.thingiverse.com/thing:3444384
Statistics
Likes
9
Downloads
0