Aeotec Quadmote Gang Plate
Description
This is a snap-fit mount for the Aeotec QuadMote Zwave multiswitch. I have a pretty thick wall so I welded 2 single gang boxes together so I have a double deep box. I put a receptacle in the deepest box, plugged in a USB power block, and now have the QuadMote permanently powered. I had originally used the OEM magnet mount stuck to a square plastic plate over the gang box - but my 2 year old would constantly steal it. So I made this. The snap fit is very tight, so depending on the tolerances of the different QuadMotes, you may have to trim the snap tabs ever so slightly. The screw holes for mounting fit a standard North American gang box with 6-32 screws.
Statistics
Likes
0
Downloads
0