Bondtech E3D Morninglion Industries Mount with BLTouch option
Description
This is a new mount I made for the Bondtech direct drive and E3D V6 hotend. It uses my standard catalog of parts including chain, fan duct and 40mm fan for the E3D cooling. Print with support everywhere EXCEPT the fan duct. I use PrusaSilcer and have included a screenshot of my setup. I use PLA for my mounts and it works just fine, even printing ABS. Everything is optional. Any Anet A8 fan duct should work, BLTtouch is not required. The offset for the BLTouch is +27mm on X axis. 0mm Y. In Marlin it looks like this: NOZZLE_TO_PROBE_OFFSET { 27, 0, -1.15 } This moves the X chain pretty far out from the typical point, I have included a part to fix this on the 3DLS but you may need to adapt for other machines. I moved the chain mount out 30mm and up 18mm. #Thank you! - Update 1/23/2021 Did some tweaks on the base of the carriage. More strength, more access. - Update 2/6/2021 Made the fan duct a continuous ring to help with cooling and stability since the BLTouch is out of the way on this one. Been running it for a month now on the 3DLS perfectly!
Statistics
Likes
5
Downloads
0