Ender 3/pro/v2 Y-axis handle - camera mount (gopro type) (max 65C bed if using PLA)
Description
### PLA bed temp only 60-65C if using PLA ### at 80C bed it failed, and started scraping against the tensioner. Added a version without the GoPro mount --- [](https://www.buymeacoffee.com/squirrelf) **Please consider donating if you find it useful or want to support me - THANK YOU!!** (use the buy me a coffee or the "Tip Designer" button) --- ## I made a printable m12 mount with case and gopro type mount ##https://cults3d.com/en/3d-model/gadget/printable-m12-lens-mount-for-pi-camera-v2-8-mpix-gopro-mount-case For the Ender 3 V2 (I assume it should work on ender 3 and pro, let me know if it is not) Wanted to make my own design just for fun, of an existing concept (inspired by the handle [2957507](https://www.thingiverse.com/thing:2957507) and it's camera mount remix [3844371](https://www.thingiverse.com/thing:3844371)) I decided to go with the gopro type mount, because it is common. Extension arms can be printed to adjust things to your own preferences. This has an extensive selection of extra arms [2194278](https://www.thingiverse.com/thing:2194278) I printed vertically to reduce the amount of support (only touching bed), but that means it is structurally less strong, but for the weight of a pi cam I don't think this is going to matter, and it does feels pretty sturdy enough for it's use case. Though printing flat will most likely create a stronger piece, but you'll need a lot more printed support. I don't know if it is strong enough for an actual gopro, regarding shakes during movement. I don't have one so can't test. It is just long enough to clear the print head (see picture, bed is fully moved to the far back), but if you have a gopro and it touches the print head, you can add an short extending arm that moves the camera further away (again found there: [2194278](https://www.thingiverse.com/thing:2194278)) I made a case for a raspberry pi camera (v1 or v2 but not the newer 12MP one, I don't have one), I will link it here once posted
Statistics
Likes
104
Downloads
0