Universal magnetic hook
Description
This is a universally usable hook. Besides the printed part you need a magnet. I used a 10x10x4 mm neodym magnet. But sizes up to 14x14x4mm should fit easily. If not resized, the slot in the part is made to fit am 4 mm thick magnet. The thin wall of the slot is designed for a 4mm nozzle. CARE: The Orientation of the print should consider the way, in which the thin wall of the slot is printed. I uses these low-priced magnets, which, in my case lift about 0,5kg: https://amzn.to/39ayFpG You can also fit a cycle shaped magnet with a diameter of ~10mm as long as its 4mm thick.
Statistics
Likes
0
Downloads
0