Kmart LED Wooden Alarm Clock Dimmer
Description
A template for creating a dimming screen for the Kmart LED Wooden Alarm Clock. (https://www.kmart.com.au/product/led-wooden-alarm-clock/2830313?&gclid=CjwKCAiAr6-ABhAfEiwADO4sfVa4Z7p-gZx3l9_4e0HhMqoh7XbCk2lVp6kYCtkNif_PrI9V2APyMhoCo7wQAvD_BwE&gclsrc=aw.ds) I used some Polypropylene document dividers as the dimming medium, which also came from Kmart, as they are laser safe, cheap, and dim the display quite significantly. (https://www.kmart.com.au/product/10-tab-plastic-dividers/2529316) I cut the sheet with a 50 W CO2 laser in Lightburn, with settings of: 1 pass at 38mm/s and 18% power. Your settings will likely vary. You could also use a pair of scissors and a printout of the DXF I have included if you do not have a laser cutter or anything similar. I put four strips of the thin, double-sided tape from Officeworks on the face of the clock. (https://www.officeworks.com.au/shop/officeworks/p/j-burrows-double-sided-tape-with-dispenser-12mm-x-25m-jbdbl1225d) I then just placed the sheet on the tape, and it held nicely.
Statistics
Likes
3
Downloads
0