1515 Conformal Rail Button Backplate Mount
Description
This is a continuation from my 1010 Conformal Rail Button Backplate Mount design that has been upgraded to 1515 rail buttons for use on 1515 launch rails. It's purpose is to provide a way to mount the rail button nut so that it does not interfere with the operation of the recovery system. 1010 Conformal Rail Button Backplate Mount https://www.thingiverse.com/thing:3467549 This place where the nut sits is designed to fit the 1/4"-20 nut. There are two designs: A) This will fit 6 inch airframe tubing that has an ID of 6.0 inches (152.4mm). B) This will fit 6 inch coupler tubing that has an ID of 5.775 inches (146.69mm) If you need a rail button take a look at a look at a couple of my designs below. 1515 Aero Rail Button Conformal 3.1 inch (79mm) https://www.thingiverse.com/thing:4606668 1515 Aero Rail Button Conformal (3.1 inch/76mm tubing) w/Standoff https://www.thingiverse.com/thing:4595270
Statistics
Likes
0
Downloads
0