1927 Nash Carb Heat Control panel
Description
This is a reproduction of the dash panel for the carburetor heat control on a 1927 Nash. Similar or same part used on other years. This is for the lower end model. Print the panel in black with top 2 layers silver. Print with supports as there is a cavity on the build plate for gluing the mounting pins to the back. Should be able to use press nuts to mount. Dash is wood and 3/4 to 1" thick and needs the 1 1/4 inch pins to provide enough length for using a press nut on the back. Print mounting pins with flat side on base. Printed with .15 layer on prusa mini.
Statistics
Likes
1
Downloads
0