Lithopane Lamp with Lighted Backsplash
Description
This is a lithopane holder lamp. To generate a lithopane that fits go to https://lithophanemaker.com/Curved%20Lithophane.html and use the following settings: * Height: 125 * Angle: 90 * Maximum Thickness: 3.2 * &Make sure you upload a 4:3 aspect ratio landscape photo Settings not mentioned above shouldn't matter much for fitment. Supplies Needed: * 1x of every STL here, printed * 1x printed lithopane that fits For the light hardware, you can get creative. The following is just what I used: * 1x 0.5in section of 1/8-IP thread 'nipple' (it's what's on the package) * 1x Tapped 1/8-IP Hex Nut * 1x E11 Socket /w a receiver for the 0.5in 1/8-IP nipple on the bottom (fairly standard lamp hardware) * 1x 50-Watt Equivalent Bright White (3000K) T4 Mini Candelabra E11 Base Decorative LED Light Bulb * 1x 8ft power cord * 1x feed-through on/off switch I've also included the STEP file in case anyone wants to further modify this lamp
Statistics
Likes
19
Downloads
0