Dividers for raaco Drawers, optional slope, customizable
Description
Drawer dividers for raaco storage cabinets. These also fits Cocraft cabinets (Clas Ohlson's brand) Has preselectable dividers for drawers: * 150-00, 108980, Dimensions (H x W x D): 41 x 55 x 153 mm * 150-01, 104692, Dimensions (H x W x D): 41 x 67 x 153 mm * 150-02, 104715, Dimensions (H x W x D): 64 x 91 x 154 mm * 150-03, 104708, Dimensions (H x W x D): 64 x 279 x 155 mm * 150-04, 109178, Dimensions (H x W x D): 64 x 139 x 155 mm * 250-01, 107273, Dimensions (H x W x D): 58 x 80 x 239 mm * 250-02, 107259, Dimensions (H x W x D): 92 x 159 x 239 There are eight predefined dividers available. * Type 1, 40.5 x 31 for 150-00 * Type 2, 85 x 39 for 150-02 * Type 3, 132.5 x 50 for 150-03/04 * Type 4, 137 x 31 for 150-01, large * Type 5, 62.5 x 31 for 150-01, medium * Type 6, 32 x 31 for 150-01, small * Type 7, 75 x 46 for 250-01 * Type 8, 154 x 80 for 250-02 The dividers are not completely rectangular, but have slanted sides, just as the original (expensive) dividers, and rounded corners. You can also enter your own values, * width * height * side angle * top radius * bottom radius * thickness. Selections for * no slope * slope on back * slope on both sides * height of the slope. Set your slicer's layer height for optimal smoothness of the slope. You can put optional recessed text on the divider. The text "UP" is preselected, as on the original, but can be omitted. Updates: 27/1 -21 Added an option to slope the divider 27/1 -21 Added parameter and functions to compensate for over extrusion in slope mode
Statistics
Likes
3
Downloads
0