X/Y Axis Ghosting and Smoothness Test
Description
On the front (where there are the X and Y letters) is where you can see the degree of your printers ghosting. On the back, the smooth side, you can tell if you're printer has any problems with smooth walls if you see uneven lines or minimal indents in the path of the extrusion. I also attached a Gcode to save you some time . It's 225x225mm and 8mm high. 1h20m approximate print time. 0.4mm nozzle. 0.2mm layer height. **IMPORTANT** **Sliced to work with Ender 3/ Pro/ V2. Make sure you're printer is compatible with the Gcode to avoid damaging your printer.** (Note) That not all problems found by this print must be caused by either the X or Y axis. Some visible imperfections can result from problems in your Z rod if you're printer has one or in printer settings. Comments are welcome
Statistics
Likes
1
Downloads
0