VIPonics Hydroponic Herb Garden
Description
This is the debut VIPonics hydroponics garden system. This simple design allows for very easy herb and other small scale indoor gardens. To use, please assemble the lid on the base and make it rest flush with the walls of the reservoir. Fill the reservoir up to the "F" fill line located on the side filling area. Make sure the water line is touching the letter F to insure water passthrough into the net pots. Do not overfill. If the substrate is still dry in an hour add more water. Print the Lid and Base at .2 or .15 layer heights, I printed at 75 bed and 215 nozzle but print at your most comfortable settings to ensure proper layer adhesion. Print the net pots at 1.5 layer heights and a colder temp to reduce stringing, print upside down so that the VIP logo is facing upwards. Print with support enforcers in the center but not touching the sides, ensuring the bottom of the pot is supported properly. This design is water-tight in testing but your results may vary. I am not responsible for potential water damage or plants lost. Thank you for trying my design!
Statistics
Likes
10
Downloads
0