Monitor phone mount
Description
Variable phone mount to be hang onto your Monitor. **Additional needed:** • 1x M3x8 bolt • 2x M5x25 hex bolts • 2x M5 wing nut • 2x M5 washer • rubber band **Print:** You can print this with your standard medium resolution. For me it`s 0.2 mm. If your Smartphone is longer than mine, you can use the straight arms. Only the base needs support material. If you do not trust in your slicer, you can use the pre-supported variation. **Assemble:** Assemble as shown in the Pictures. I only had M5x30 bolts, that’s why they are a little bit too long. The distance sleeves can be used to stop the head, just below its position with a phone inserted.
Statistics
Likes
9
Downloads
0