E3D V6 Mount + 50mm Dual Blower
Description
Based on the mapaisrual design, I have designed my own mount for the E3D V6 with the possibility of putting 2x 50mm layer fans on it. The fanducts are fitted by the sides and then fastened by a screw, in this way they are easy to install and to design new ones for different types and sizes of blowers. Apart from the printed parts you will need for the clamp and the support: - 2x M5 thread inserts - 2x M5x15 bolts - 2x M3x10 bolts For **EACH** fanduct you will need: - 2x M3 nuts - 2x M3 washers - 2x M3x16 bolts - 1x M3x25 bolt (this is to hold the fanduct to the mount, a slightly larger or smaller size could be used)
Statistics
Likes
4
Downloads
0