spool holder knob for snapmaker 2.0
Description
Many snapmaker 2.0 users are printing their own spool holders. These are much less resistant than conventional ones, which can further improve print quality. https://www.thingiverse.com/thing:4463794 https://www.thingiverse.com/thing:235925 However, a small screw fixing the filament holder is not inconvenient. I have seen that many people who have built and certified are still using these little original screws. So I put a knob on the small screw bolt to make it easier to handle. Please use it more comfortably. The value of this cap is that the spool holer prevents dislocation while in use, while allowing the filament to be replaced without touching the cap itself Thank you. Precautions : Strings are generated in the over hanging part that cannot be completely removed because support is not used, but it is a part that is not visible when used and there is no functional problem. source model : “M8 Captive Nut Knob” by Richard Tyler at autodesk online gallery Q & A --------- Q: The plan was to print that next but I was waiting for your reply on that thing. So you used 2 608 ball bearing and without the central mount and without the rod in order to have this sit on the original Snapmaker mount? A: If you are a snapmaker 2.0 user, you only need stl files starting with "608_" from "https://www.thingiverse.com/thing:235925". Also, there is no need for the "608_mount.STL" file. This is because it will be used by inserting it into the spool holder part provided by snapmaker. In other words, "608_spacer.STL" is a necessary part to adjust the bearing interval. And you must get 2 608 bearings anywhere. Two photos are posted(added). One is the parts that come with the snapmaker, and the other is a picture of what needs to be printed or obtained. (Including 2 bearings)
Statistics
Likes
5
Downloads
0