Mine Railway H0
Description
Mine Cart and tracks as extension for Faller Bergewerk B-163 The track width is 5mm. In addition to the printed parts wire of 0.9-1.0mm thickness is needed to create the axles, hinges and hooks. The chains to link the carts are made from 0.5mm thick wire. Wind the wire into a coil around a cylinder with 1.2mm diameter (small screw driver will do). The coil is then cut into little rings with a wire cutter. The middle chain link is round. The first and last links are slightly oval and can be wound around the tip of a slotted screwdriver.
Statistics
Likes
24
Downloads
0