Argon NEO PI-KVM + Auvidea B101 cover
Description
This is a top for the Argon NEO Raspberry Pi case, designed to replace the original top. It has space for an Auvidea B101 HDMI to CSI converter. That converter is held in place by the perma-proto board. Materials used: - [Argon NEO Raspberry Pi 4 Case](https://www.argon40.com/argon-neo-raspberry-pi-4-case.html) - M2.5 [screws](https://www.aliexpress.com/item/1005002001496840.html) and standoffs - [Adafruit Perma-Proto HAT](https://www.adafruit.com/product/2310) - ATX control - Old Ethernet cable - Tie wraps as strain relief - 4x MOSFET relays OMRON G3VM-61A1 - 4x 390 Ohm resistors. - 2x 4.7k Ohm resistors. - Some connectors - Raspberry Pi 4 4GB - 32GB SD card - Raspberry Pi USB-C power supply - [Auvidea B101 HDMI to CSI-2 Bridge](https://auvidea.eu/b101-hdmi-to-csi-2-bridge-15-pin-fpc/) - Some tape to put on the perma-proto board to electrically isolate the B101 - USB-C/Power Splitter Module (<a href="https://www.tindie.com/products/8086net/usb-cpwr-splitter">UK</a>/<a href="https://www.pishop.us/product/usb-c-pwr-splitter/">US</a>/<a href="https://www.buyapi.ca/product/usb-c-pwr-splitter/">CA</a>) - USB-C to USB-C cable - USB-C to USB-A cable
Statistics
Likes
2
Downloads
0