Raspberry Pi3 Case for Prusa MK3S with Light Bar and 30mm Fan
Description
**UPDATE on 26APR2021:** Do not use this case with a fan. Using a fan with the current case will cause the X-axis motor to crash into the fan when printing tall objects and during Z-axis and XYZ calibration! This is a remix from https://www.thingiverse.com/thing:4613758 and https://www.thingiverse.com/thing:4165611 The case from https://www.thingiverse.com/thing:4613758 allows you to mount a Raspberry Pi3 under the LED Light Bar Prusa i3 MK2/MK3 (https://www.prusaprinters.org/prints/3267-led-light-bar-prusa-i3-mk2mk3), but this remix includes a 30mm fan slot (from https://www.thingiverse.com/thing:4165611) for the Raspberry Pi3. Installing the Pi3 into the case and mounting the case onto the MK3S frame is awkward, as you will need to mount the "bottom" of the case to the frame before adding the Raspberry Pi3 and the "top" of the case. #### To print the complete case, you will need the following files: 1. The "Pi3_Case_MK3S_light-bar-and-30mm-fan__top_v1.stl" file from this remix. 2. The "BottomCase.stl" from https://www.thingiverse.com/thing:4613758/files 3. (Optionally) one of the fan cover files from https://www.thingiverse.com/thing:4165611/files
Statistics
Likes
1
Downloads
0