Parking sensor mount/support
Description
Cheap sensors and expensive bumper, so i tried something that is reversible in case the sensors die out.. Mount/support for parking sensors under the bumper. Being closer to the ground the sensors need to be angled up so they don't detect the ground, that where the angled part comes in. There are two models, one with the holes centered and one with the holes closer to the front. The ones with the holes closer to the front are the ones mounted on the license plate number. After putting the sensor in the mount, the back side with the wire was covered in hot glue leaving a small drain hole in case water gets in. I've used them for 2 months so far, in rain, snow, ice, they are still working without any issues. If you always rub your bumper onto curbs, this is not a solution for you... Fixing onto the bumper was done with self tapping crews.
Statistics
Likes
0
Downloads
0