CRKBD / Corne Keyboard Case v2 Tenting
Description
Hey Guys! I love the design made by Coumbaya, however I wish it had some tenting. I could just glue on some tents, but it looked off, so I designed some! (It's also my first design/remix.) Two versions are here, if you already have the case just print the legs, and they fit like puzzle pieces. Or you can print the whole case with tenting. Happy Keebing! The holes for the tenting points are set to 5mm allowing some shrinkage. This is to allow the option to drill and tap whatever size you want. I'll be using 5mm. There is just enough space between the hole and the body of the case to allow nuts to be below the tenting holes. If you don't wish to thread these you can rely on the nuts. HARDWARE: 5mm threaded rod. I used two at 70mm and two at 25mm. I recommend buying excess then cutting down to size. You can also just use bolts. Use some rubber, or dots of hot glue for grip and surface protection. This is a remix from https://www.thingiverse.com/thing:398515
Statistics
Likes
4
Downloads
0