Keyboard Stabilizer
Description
Keycap stabilizer designed to work with the [SiCK-68 Mechanical Keyboard](https://www.thingiverse.com/thing:3478494) and MX-compatible keycaps made with [KeyV2: Parametric Mechanical Keycap Library](https://www.thingiverse.com/thing:2783650). Other combinations of keys and keyboards might also work, but your mileage may vary. What you need to print (per key) * 2x KeycapAttachment_V1 * 2x StabilizerSlot_V1 OR 1x StabilizerSlot_V2 (either works, but V2 should be stronger) Other materials: * Paper clip (strip coating, if needed), ~1mm diameter * Glue (I used cyanoacrylate "super glue") * Pliers (makes bending easier) * Wire clipper (to trim ends) * If parts don't fit, a small file may be needed to file things down to size
Statistics
Likes
2
Downloads
0