Parkside X20V Team Shelf / Wall Battery Holder
Description
*Sorry for the incomplete description, but Thingiverse still sucks. Playing with this shitty interface and service is a waste of time.* The mounting bracket allows you to mount the battery under the shelf of the cabinet or on the wall. If you use 6.3 mm connectors and cables, you can use the holder and battery to power other devices. --- This is my project of useful gadgets and portable wireless devices for Parkside X20V batteries. There are: - Mounting brackets for the charger - Battery mounting bracket (shelf and wall mount) - Floodlight / Work Light - LED 10W - Audio amplifier TPA3116 Wuzhi - maximum output power RMS 2x20W/4R, 2x24W/8R - Power supply DPS3005 (max 19.5V/5.1A) - available on [Cults3D.com](https://cults3d.com/en/3d-model/tool/parkside-x20v-team-rd-dps3005-portable-100w-power-supply) only - Soldering station KSGER T12 OLED - available on [Cults3D.com](https://cults3d.com/en/3d-model/tool/parkside-x20v-team-ksger-stm32-oled-t12-portable-soldering-station) only STEP files are available so you can modify them to suit your needs. If you like this project and appreciate my work, you can support me through [PayPal](https://www.paypal.com/donate/?hosted_button_id=DTDGEWZF4YA44 "Send a small tip"). --- You need: - 2 pieces 3.5x16 mm wood screws - optional long 6.3 mm connectors and 0.5-1mm2 cables The photos should explain everything. --- The third photo shows the recommended orientation of the elements when printing. Walls thickness 1.6 mm (4 shells). Layer height 0.2 mm. Infill 25-30%.
Statistics
Likes
75
Downloads
0