53-55 F100 - CV Conversion Cluster
Description
<b>****Work in progress</b> <b>############################ UPDATES ################################</b> <b>2/13/21 - <font color="Blue">Updated the 53 Cluster to #16....One of the LED holes was not center with the bottom indent</font></b> <b>2/11/21 - <font color="Blue">Updated the 53 Cluster STL. Several Adjustments to fit the speedometer and Shifter Mechanism for a better fit</font></b> <b>########################## DESCRIPTION ##############################</b> This is Parts used to convert a 01 Crown Victoria Dash Cluster to look and retain functionality within a 53-55 F-100/F-250 Dash without cutting the wiring harness. <b>############################# PARTS ##################################</b> <b>It will require 2 parts to be printed:</b> <b>53 Cluster (16).stl</b>- Is the Insert that goes into the Stock Cluster <b>53 Spacer Adapter (6).stl</b> - This connects the back of the CV Cluster and onto the 53 Cluster allowing enough room to let things work <i><font color="Red">I have also added a split file of the spacer adapter for printing on smaller printers.</i></font> <b>Parts Needed/Recommended:</b> *12mm LED Dash Indicators - https://www.amazon.com/gp/product/B0765LWN88 *T10/194 Bulb to Wire Conversion - https://www.amazon.com/gp/product/B0837SZ1NJ *Bullet Connectors - https://www.amazon.com/gp/product/B01D9D0TGE *Hot Glue Gun - This will be used to secure the gauges to the 53 Cluster *M5 Screws - This will connect the Cluster to Spacer Adapter *M3 Screws - Will connect the CV Housing to the Spacer Adapter <b>########################## INSTRUCTIONS ##############################</b> <i><font color="Red">I will provide full instructions once I complete this project</font></i> On your cluster, you will want to cut the metal bezel down to be even with the side mounts. I have added a picture Showing the lines where i cut my bezel
Statistics
Likes
3
Downloads
0