Woodpeckers router lift plates
Description
Woodpeckers wouldn't ship to my location, so I took measurements from one of the 3 plates that came with my router lift, and came up with these. These are metric equivalents to the imperial 8 pc set Woodpeckers sell. I also included a 70mm plate which I used for initial testing, and a storage case with enough slots for this set, and the 3 which came with the router lift. 22/02/2021 I added a tool holder to the case, I also included the tool holder as a separate part which can be glued onto the existing case. I have also added a 'solid' router plate which I had forgotten to upload last time. 22/10/2021 I have added a tool holder for the new type of tool now supplied with the discs. It is designed to glue onto either of the longer sides of the storage case. I haven't printed it so it is untested (as I don't have the new tool to test it with). 23/10/2021 I have added a screw mount bracket which can be glued to ether of the longer sides of the case. This allows the case to be case to be wall mounted. I also added a French cleat mount which interlocks with the screw mount bracket. The pockets in the rear of the French Cleat mount are for 10mm AF nuts which will fit M6 screws or bolts. Please note the cleat requires the screw mount bracket and will not work without it. I haven't printed either of these models, so they are untested. 26/10/2021 Additional images of the 3 new parts provided by krzyh8z.
Statistics
Likes
5
Downloads
0