Underhanging Scraps Box for Lack Table
Description
I made this scraps bin so my box of printing scraps wouldn't take up any space on the top of my IKEA Lack Enclosure and I could better use the space for other things. The box itself is 200x200mm. You'll notice there is only one file for each of the hanger types; if you are new to 3D printing this is because slicers allow you to mirror the part in the desired direction, making it unnecessary to include a "Left" or "Right" version in the 3D files. Simply mirror the hanger of your choosing after duplicating it and you'll be good to go. You will need 4 M3x8mm(Or similar length) screws for attaching the hangers to the box, and two more if you use the optional v-slot mount. Note: The regular hangers can be mounted to the bin in several orientations, even without the use of the "adjustable" hangers I also included in the files. I would recommend the regular hangers since they seem more robust.
Statistics
Likes
10
Downloads
0