Folding Hex Bit Holder
Description
---I made a customizable version of this thing. please check it. https://www.thingiverse.com/thing:4802057 --- This is a foldable bit holder. You can spread this out to make it easier to get in and out of the bit. By connecting as many bars as needed, you can realize any size and add more in the future. Depending on the fixing location of the screw, a folding screen type, a folding fan type, or a completely fixed type can be realized. youtube: https://youtu.be/ARLnm7v1b6Y https://youtu.be/4w1fvaq796Q [print conditions] filament ... PETG support ... Yes (It is better to block the support for the bit hole part.) brim ... No infill ... bar:0% (Highly recommended), binder:15%-100% perimeters ... 2 or 3 lines (Please select with the tightness of inserting the bit) [Screws to use] CAP M3 Bolt 15mm long x (Number of bars + Number of binders - 1) No nuts needed. [revision] 2021/02/27 I added the binder files for "odd" numbers of bars. I also made a few changes to the binder files for "even" numbers of bars. I have only tested with 5_bar, so there is still the possibility of some problems with other odd bars. 2021/02/22 I added 4 files. These are binders for bundling holder bars. This makes the holder very stable and easy to handle. I have only tested with 4_bar and 6_bar, so there is still the possibility of some problems with 8_bar and 10_bar. If you have any problems, please comment. 2021/02/05 A small hole was made in each bit hole so that it could be easily taken out when a small bit was buried.
Statistics
Likes
228
Downloads
0