Fiber optic cannulae holder for stereotax
Description
This is a holder for 1.25 fiber optic cannula for use during stereotaxic surgery. The holder should thread into the dowel. Finally, glue a ceramic mating sleeve into the holder. Print holder with supports and both pieces with a 50% infill density to make them a little sturdy. I print at a slow speed and a layer height of 0.05 to make sure the threading is correct. Ceramic Mating Sleeves: https://precisionfiberproducts.com/ceramic-split-sleeve/ Fiber optic cannula: http://www.newdoon.com/en/index.php?route=product/product&product_id=51 M3 thumb screws: https://www.mcmaster.com/92558A310/ My lab uses black ceramic 1.25 mm ferrules.
Statistics
Likes
0
Downloads
0