DeWalt XR 20v oscillating tool holder
Description
This is a hanging holder for the Dewalt XR 20V Max oscillating tool, designed to hold it in place with the battery attached, if you want. Held in place by two screw holes, your screw may vary. The holes ara a little small, but drill easily or can be opened up with a deburring tool if need be. As always, open it up first if you need to and watch your torque putting it in place. I printed this at .32 layer height with a 1MM nozzle which made for a quick print, but .28 layers on a 0.4MM nozzle is just fine. Prented with 20%infill on ABS, but PLA works surprisingly well, you just might want to bump it to at least 30% infill.
Statistics
Likes
7
Downloads
0