Minor Voron v2 mods
Description
Belt clips designed to hold the z-belts of a Voron 2.4. May be useful in other applications too. Can easily be adjusted in your slicer software to fit broader or narrower belts. Flex bed locator / stop. Affixed to 2020 extrusions with M3 screws and t-nuts. Raspberry camera enclosure for the rear of the enclosure. Revolves and tilts. Base attaches to 2020 extrusion via one or two M3x20 screws and t-nuts. Camera enclosure requires at least two M2x10 screws and nuts. Cam_base_large_offset.stl is a version with more generous tolerances to the rack. STLs should load into slicer in ideal printing orientation. No need for supports if you have properly calibrated bridging/overhangs.
Statistics
Likes
9
Downloads
0